2hp 1 Speed 56 Frame EMG Motor

2HP 1 Speed 56 Frame EMG Motor

Genuine 2hp 1 speed 56 frame motor manufactured by E.M.G Elettromeccanica S.R.L and designed specifically for pumps fitted to hot tubs and spas. Italian brand E.M.G manufactures many different types of Hot Tub pump motors and they supply two of the largest spa pump brands Waterway and Aqua-flo. Their Hot Tub motors are economical and designed for the European market with a rear cooling fan that blows ambient air from the rear of the motor when running through external cooling fins on the side of the motor.

This heavy duty 56 Frame 2hp EMG motor will replace other types of hot tub pump motors with the same 56 frame size from brands like EME, AO Smith, Franklin Electric, Century Laser, US Motors etc. This exact motor is so common and it can be found on countless Waterway and Aqua-flo pumps, XP2, XP2e, Executive Euro etc. Replacement motor for Waterway pump PF-20-1N22X.

Found on many USA brands of hot tubs, Arctic Spas, Beachcomber, Aegean, Marquis Spas, Hydropool, Canadian Spas, Cal Spa, Catalina Spas, Coast Spas, Coleman, Coyote, Saratoga, Hydro Spa, Spaform, Vita Spas, Sunrise, Gulf Coast..... the list goes on.

EMG Motor Overview

• Speeds - This is a 2hp 1 speed Hot Tub pump motor so the single high speed is used for JETS or Boost operation when bathing in your Spa or Hot Tub.
• Frame Size - This is a 56 frame motor and it will fit a 56 frame pump wet end from brands such as Waterway, Aqua-flo, Sta-Rite, Vico & Balboa. See below for more information on motor/wet end frame sizes.
• Wiring - This replacement motor is NOT supplied with a new cable so you will need to swap over from your old existing pump motor when installing. You will have three wires, live for the high speed (Red, Brown or Black). Neutral (Blue or White) and Earth (Green). If you need a new cable for your new pump then see related products.

EMG Motor Specifications

• Manufacturer - EMG
• Part Number - EMG-M-2-56-1SPD
• Type of Product - Spa Pump Motor
• Number of Speeds - 1 (high speed)
• Motor Frame Size - 56 Frame
• Horse Power - 2HP
• Amps Low/High - N/A/9.5
• KW Low/High - N/A/1.5
• RPM Low/High - N/A/2800
• Hz - 50
• Dimensions (MM) - Length: 287 (Excluding shaft), Height: 240(old model was 205), Width: 175

How do I know if my hot tub pump has a 48 Frame or 56 Frame motor?

Firstly dismantle your old hot tub pump by removing the four bolts that attach the wet end to the motor. At the rear of the motor, you will have the rear end of the motor shaft that runs all the way through the motor and threads onto the impeller inside the wet end. This shaft end will have a large flat slot for a screwdriver to go onto, simply get another screwdriver and trap the impeller inside the wet end and then unthread the motor shaft from the impeller. You will now have the wet end removed from the motor and you can work out if you have a 48 frame or 56 frame EMG motor.

48 Frame EMG Motors

There is only one type of 48 frame sized motor and will fit all modern day 48 frame pump wet ends. Measure diagonally the centres of two of the four bolt holes that attached the motor to the wet end, this measurement will be 130mm.

56 Frame EMG Motors - 6.3"

The modern 6.3" 56 frame motors will fit all modern day 56 frame pump wet ends. Measure diagonally the centres of two of the four bolt holes that attached the motor to the wet end, this measurement will be 147mm.

56 Frame EMG Motors - 6.1"

These 56 frame 6.1" motors are an old size and now no longer manufactured and you will need to replace your complete hot tub pump. These are NOT measured diagonally, they are measured side to side and the centres of two bolt holes that attached the motor to the wet end are 102mm. These are generally found on old Aqua-flo XP2 pumps.

Top Tips

We recommend replacing the mechanical shaft seal in your wet end as if this is leaking will cause your new motor to fail prematurely. See related products.

We Are Here To Help!

It can be a bit confusing choosing your new Hot Tub pump motor as brand names and models are not always written on them. The quickest way is to simply send us some images of the motor you are replacing though our Contact us page and let us do the work for you.