LX Spa Pump Shaft Seal Kit (2008 Onwards)

27 item(s)
HTP2538
13.39
(11.16 Ex. VAT)
Manufacturer: LX
+

LX Spa Pump Shaft Seal Kit

Genuine replacement upgraded ceramic carbon shaft seal kit for LX pump wet ends used with Hot Tubs & Spas from 2008 onwards. The Ceramic part is installed on the inside rear of the wet end and the spring loaded carbon part is installed on the rear of the impeller shaft. The two parts when installed are spring-loaded to create a watertight seal between the LX pump impeller and rear volute within the wet end assembly. No silicone is required as the ceramic part has a rubber outer to seal around the inside edge of the wet end rear volute plastic.

To prevent premature wear of these seals avoid getting grit, dirt or grease on either of the two faces.

This upgraded replacement LX shaft seal kit fits all LX spa pumps 2008 onwards other than the DH1.0 LX circulation pump. Fits models JA35, JA50, JA75, JA100, JA200, TDA35. TDA50, TDA75, TDA100, TDA150, TDA200. LP200 & WP200-II, LP250 & WP250-II, LP300 & WP300-II, EA350, EA450 & WTC50M.

 

Product Specifications

  • Manufacturer - LX Pump Co
  • Part Number - SK-LX302
  • Type of Product - Pump Shaft Seal Kit
  • Spring Base Diameter: 41mm
  • Seal Length Combined: 30mm

 

We Are Here To Help!

It can be a bit confusing choosing the correct hot tub parts for your hot tub pump as brand names and models are not always written on them. The quickest way is to simply send us some images of the complete hot tub pump you need the replacement parts for through our Contact us page and let us do the work for you.

Good to know

Send us a photo

Balboa Approved